examNew 2021 CCNP 350-601 DCCOR exam questions from leads4pass 350-601 dumps!
Welcome to download the newest leads4pass 350-601 VCE and PDF dumps: https://www.leads4pass.com/350-601.html (298 Q&As)
P.S. Free 2021 CCNP 350-601 DCCOR dumps are available on Google Drive shared by leads4pass: https://drive.google.com/file/d/1aDa7Hfv7xG0nwGLgc3o5zAqgtgC_bGGe/view?usp=sharing
Free CCNP 350-601 exam questions and answers
QUESTION 1
Which adjacency server configuration makes two OTV edge devices located in the same site bring up the dual-site
adjacency?
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: B
QUESTION 2
DRAG DROP
An engineer configures the netflow feature on a Cisco NX-OS device. The requirement is to reduce the amount of
export data collected by using a sampler. Drag and drop the netflow configuration steps from the left onto implemented
needed to meet these requirements on the right. Not all steps are used.
Select and Place:
Correct Answer:
QUESTION 3
An engineer is implementing OTV on a transport that supports multicast. The solution needs to meet the following
requirements:
1.
Establish adjacency to the remote peer by using multicast.
2.
Enable OTV advertisements for VLAN 100 to the other site.
Which two commands should be configured to meet these requirements? (Choose two.)
A. otv site-vlan 100
B. otv data-group 232.2.2.0/28
C. otv use-adjacency-server 172.27.255.94
D. otv extend-vlan 100
E. otv control-group 232.1.1.1
Correct Answer: DE
QUESTION 4
The Cisco Nexus 5600 Series Switch experiences occasional packet drops on interface ethernet 1/16. An engineer
wants to implement a SPAN session to investigate the issue further. The network analyzer to which the packets must be
directed is located on interface 1/3. The analyzer is limited on disk space available for traffic capture, so the Nexus
switch should send only the relevant data
Which two command sets configure the SPAN session that meets these requirements? (Choose two.)
A. Option A
B. Option B
C. Option C
D. Option D
E. Option E
Correct Answer: AE
https://www.cisco.com/c/en/us/products/collateral/switches/nexus-5000-series-switches/white- paper-c11- 733022.html
The information to be sent is regarding dropped packets only.
QUESTION 5
A Cisco MDS 9000 Series Switch is configured for SAN Analytics and SAN Telemetry Streaming. An engineer must
enable analytics for NVMe on interfaces in the range of fc1/1-12. Due to a large amount of traffic generated in the SAN
environment, the data must be collected at regular intervals of 60 seconds from ports fc 1-12 and then for ports fc13-24
for the next 60 seconds. Ports in the range fc4/13-14 were already enabled for analytics. Which set of commands must
be used to meet these requirements?
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: D
QUESTION 6
An engineer must implement a Cisco UCS system at a customer site. One of the requirements is to implement SAN
boot. The storage system maps the source WWPN to a unique LUN. Which method does Cisco recommend to
configure the SAN boot?
A. Create a SAN boot policy in which every initiator is mapped to the same target LUN.
B. Define the vHBAs as bootable and leave the default values on the target definition.
C. Define the vHBAs as bootable and leave the boot target definition empty.
D. Create a SAN boot policy in which every initiator is mapped to a different target LUN.
Correct Answer: D
QUESTION 7
Refer to the exhibit.
An engineer must monitor all LAN traffic on Fabric A from a blade server. Which source should be configured in the testspan monitor session to complete this task?
A. all vHBAs from the service profile that correspond to this server
B. all uplink FCoE ports
C. all uplink Ethernet ports
D. all vNICs from the service profile that correspond to this server
Correct Answer: D
https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/141/UCSM_GUI_Configuration_Guide_141_chapter45.html 
QUESTION 8
Which two components are used by the Cisco Nexus switches telemetry process? (Choose two)
A. data encoding
B. data manipulation
C. telemetry agent
D. telemetry compression
E. data collection
Correct Answer: AE
QUESTION 9
Refer to the exhibit. A network engineer requires remote access via SSH to a Cisco MDS 9000 Series Switch. The
solution must support secure access using the local user database when the RADIUS servers are unreachable from the
switches. Which command meets these requirements?
A. aaa authentication none
B. aaa authentication login default group radius
C. aaa authentication login default fallback error local
D. aaa authentication login default group local
Correct Answer: C
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/security/configuration/guide/b
_Cisco_Nexus_9000_Series_NX-OS_Security_Configuration_Guide/b_Cisco_Nexus_9000_Series_NXOS_Security_Co
nfiguration_Guide_chapter_0111.html
QUESTION 10
Refer to the exhibit.
Which type of backup is required to restore a Cisco UCS configuration?
A. system configuration
B. all configuration
C. logical configuration
D. full state
Correct Answer: A
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/cli/config/guide/1-0-2/b_CLI_Config_Guide_1-0-2/CLI_Config_Guide_1-0-2_chapter29.pdf 
QUESTION 11
A connect network engineer connects the CAN interface of a server to a switch. The switch must bring down all the
vlans on the interface that are not enabled for FCoE, but the Vlans that are enabled for FCoE should continue to carry
SAN traffic without interruption. Which configuration should be applied to the switch to achieve this objective?
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: D
QUESTION 12
What is a characteristic of EPLD updates on Cisco MDS 9000 Series Switches?
A. EPLD updates are installed only via the Cisco DCNM GUI
B. EPLD packages update hardware functionality on a device
C. EPLD bundles are released separately from a Cisco MDS NX-OS release
D. EPLD updates are nondisruptive to traffic flow
Correct Answer: B
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/release/notes/epld/epld_rn.html
QUESTION 13
An engineer installed a new Nexus switch with the mgm0interface in vrf management. Connectivity to the rest of the
network needs to be tested from the guest shell of the NX-OS. Which command tests connectivity from the shell of the
NXOS?
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: B
QUESTION 14
An engineer needs to perform a backup of user roles and locales from Cisco UCS Manager to replicate the setting to a
different fabric interconnect. The engineer wants to review the file before importing it to a target fabric interconnect.
Which backup type must be selected to meet these requirements?
A. all configuration
B. system configuration
C. logical configuration
D. full state
QUESTION 15
What are two types of FC/FCoE oversubscription ratios? (Choose two.)
A. server storage to end-node count
B. port bandwidth to uplink bandwidth
C. edge ISL bandwidth to core ISL bandwidth
D. host bandwidth to storage bandwidth
E. switch processing power to end-node processing power
Correct Answer: CD
Continue to follow to get more free updates…
New 2021 CCNP 350-601 exam questions from leads4pass 350-601 DCCOR dumps! Welcome to download the newest leads4pass 350-601 VCE and PDF dumps: https://www.leads4pass.com/350-601.html (298 Q&As)
P.S. Free 2021 CCNP 350-601 DCCOR dumps are available on Google Drive shared by leads4pass: https://drive.google.com/file/d/1aDa7Hfv7xG0nwGLgc3o5zAqgtgC_bGGe/view?usp=sharing
Charles Turnbull
Recent Comments