The latest Cisco Meraki Solutions Specialist exam questions and answers have been updated to ensure that they are true and valid! Cisco Meraki Solutions Specialist exam code “500-220”. Get the complete Cisco 500-220 exam dumps https://www.leads4pass.com/500-220.html (Total Questions: 57 Q&A).
This site shares a part of Cisco 500-220 exam practice questions You can practice the test online.

Cisco 500-220 exam PDF download online

Cisco 500-220 exam PDF Share a free part of the dumps from the leads4pass 500-220 exam.
Get the complete Cisco 500-220 exam questions and answers to help you pass the exam successfully

Where can I get leads4pass free Cisco 500-220 exam practice questions?

Yes! Keep reading and you can get a portion of the valid Cisco 500-220 exam practice questions for free. All questions come from leads4pass 😁↴

Share free Cisco 500-220 exam questions online practice test

QUESTION #1

Which Cisco Meraki product must be deployed in addition to Systems Manager so that Systems Manager Sentry
enrollment can be used?
A. MS Switch
B. Meraki Insight
C. MR Access Point
D. MV Smart Camera
Correct Answer: C
Reference: https://meraki.cisco.com/blog/tag/systems-manager/page/4/

QUESTION #2

When an SSID is configured with Sign-On Splash page enabled, which two settings must be configured for
unauthenticated clients to have full network access and not be allow listed? (Choose two.)
A. Controller disconnection behavior
B. Captive Portal strength
C. Simultaneous logins
D. Firewall and traffic shaping
E. RADIUS for splash page settings
Correct Answer: AB
Reference: https://documentation.meraki.com/MR/Access_Control

QUESTION #3

Which Meraki Dashboard menu section is accessed to enable Sentry enrollment on an SSID?
A. Wireless > Configure > Access Control
B. Wireless > Configure > Splash page
C. Wireless > Configure > Firewall and Traffic Shaping
D. Wireless > Configure > SSIDs
Correct Answer: A
Reference: https://documentation.meraki.com/MR/MR_Splash_Page/Systems_Manager_Sentry_Enrollment

QUESTION #4

Which API endpoint clones a new Organization?
A. POST /organizations/clone/{organizationId}
B. PUT /organizations/{organizationId}/clone
C. POST /organizations/{organizationId}/new
D. POST /organizations/{organizationId}/clone
Correct Answer: C

QUESTION #5

Refer to the exhibit. A packet arrives on the VPN concentrator with source IP 10.168.70.3 and is destined for IP
10.116.32.4. What is the next hop for the packet, based on this concentrator routing table?
A. The concentrator gateway (10.128.124.62) is the next hop.
B. Not enough detail is available to determine the next hop.
C. The packet is stopped.
D. The Auto VPN peer “Store 1532 ? appliance” is the next hop.
Correct Answer: B

QUESTION #6

Refer to the exhibit. What are the Loss and Average Latency statistics based on?
A. responses that the MX appliance receives on the connectivity-testing hostnames on the Insight > Web App Health
page
B. responses that the MX appliance receives on the connectivity-testing IP addresses on the Security and SD-WAN >
Firewall page
C. responses that the MX appliance receives on the connectivity-testing IP address that is configured on the Security
and SD-WAN > SD-WAN and Traffic Shaping page
D. responses that the MX appliance receives on the connectivity-testing IP addresses on the Help > Firewall info page
Correct Answer: B

QUESTION #7

Refer to the exhibit. For an AP that displays this alert, which network access control method must be in use?
A. preshared key
B. WPA2-enterprise with my RADIUS server
C. splash page with my RADIUS server
D. MAC-based access control with a RADIUS server
Correct Answer: A

QUESTION #8

One thousand concurrent users stream video to their laptops. A 30/70 split between 2.4 GHz and 5 GHz is used. Based
on client count, how many APs (rounded to the nearest whole number) are needed?
A. 26
B. 28
C. 30
D. 32
Correct Answer: C

QUESTION #9

Which design requirement is met by implementing Syslog versus SNMP?
A. when automation capabilities are needed
B. when proactive alerts for critical events must be generated
C. when organization-wide information must be collected
D. when information such as flows and client connectivity must be gathered
Correct Answer: D
Reference: https://documentation.meraki.com/General_Administration/Monitoring_and_Reporting/Meraki_Device_Repor
ting_-_Syslog%2C_SNMP%2C_and_API

QUESTION #10

Which three verbs of request are available in the Cisco Meraki API? (Choose three.)
A. SET
B. PUT
C. PATCH
D. ADD
E. POST
F. GET
Correct Answer: BEF
Reference: https://documentation.meraki.com/General_Administration/Other_Topics/Cisco_Meraki_Dashboard_API

QUESTION #11

What occurs when a configuration change is made to an MX network that is bound to a configuration template?
A. The configuration change in the bound network is combined with the template configuration inside the template.
B. The more restrictive configuration is preferred.
C. The configuration change in the bound network overrides the template configuration.
D. The template configuration overrides the configuration change in the bound network.
Correct Answer: A
Reference: https://documentation.meraki.com/General_Administration/Templates_and_Config_Sync/Managing_Multiple
_Networks_with_Configuration_Templates

QUESTION #12

Refer to the exhibit. During a Meraki AP deployment, the default SSID that the exhibit shows is broadcast. What causes
this behavior?
A. An AP does not have a wired connection to the network.
B. An AP cannot connect to the default gateway.
C. An AP has never connected to the Meraki Cloud Controller.
D. An AP has Site Survey mode enabled.
Correct Answer: C
Reference: https://documentation.meraki.com/MR/Other_Topics/Troubleshooting_local_connection_issues_using_default_SSID_on_MR_Access_Points

QUESTION #13

How does a Meraki device behave if cloud connectivity is temporarily lost?
A. The offline device continues to run with its last known configuration until cloud connectivity is restored.
B. The offline device reboots every 5 minutes until the connection is restored.
C. The offline device stops passing traffic.
D. The offline device tries to form a connection with a local backup server.
Correct Answer: D
Reference: https://community.meraki.com/t5/Security-SD-WAN/Cloud-Services/td-p/43141

QUESTION #14

A customer wants to use Microsoft Azure to host corporate application servers.
Which feature does the customer get by using a vMX appliance rather than connecting directly to Azure by VPN?
A. malware protection
B. SD-WAN
C. next-generation firewall
D. intrusion prevention
Correct Answer: C

QUESTION #15

A customer requires a hub-and-spoke Auto VPN deployment with two NAT-mode hubs with dual uplink connections and
50 remote sites with a single uplink connection. How many tunnels do each hub need to support?
A. 52
B. 54
C. 100
D. 104
Correct Answer: C

---

Summarize：

Cisco 500-220 exam questions and answers are updated. All exam questions and answers have been updated and corrected. leads4pass 500-220 exam dumps https://www.leads4pass.com/500-220.html (PDF + VCE). Guarantee 100 % Successfully passed the exam.

ps.
Cisco 500-220 exam PDF Share a free part of the dumps from the leads4pass 500-220 exam.
Get the complete Cisco 500-220 exam questions and answers to help you pass the exam successfully