The latest updated Cisco 350-801 exam dumps and free 350-801 exam practice questions and answers! Latest updates from leads4pass Cisco 350-801 Dumps PDF and 350-801 Dumps VCE, leads4pass 350-801 exam questions updated and answers corrected! Get the full Cisco 350-801 dumps from https://www.leads4pass.com/350-801.html (VCE&PDF)

Latest 350-801 PDF for free

Share the Cisco 350-801 Dumps PDF for free From leads4pass 350-801 Dumps part of the distraction collected on Google Drive shared by leads4pass
https://drive.google.com/file/d/1cq9l9Q2Qe4Mk-ivRolvWBH6faPuQ8EN_/

The latest updated Cisco 350-801 Exam Practice Questions and Answers Online Practice Test is free to share from leads4pass (Q1-Q13)

QUESTION 1
Which field of a Real-Time Transport Protocol packet allows receiving devices to detect lost packets?
A. CSRC (Contributing Source ID)
B. Timestamp
C. Sequence number
D. SSRC (Synchronization identifier)
Correct Answer: C

 

QUESTION 2
Which statement describes the Maximum Serving Count service parameter of the Cisco TFTP service on Cisco Unified
Communications Manager?
A. It specifies the maximum number of files in the TFTP server disk storage.
B. It specifies the maximum number of TFTP client requests to accept and to serve files at a given time.
C. It specifies the maximum file support by the Cisco TFTP service.
D. It specifies the maximum file counts, in the cache as well as in disk, that are supported by the Cisco TFTP service.
E. It specifies the maximum number of TFTP client requests to accept and to serve files in a 120-minute window.
Correct Answer: B

 

QUESTION 3
Which configuration on Cisco Unified Communications Manager is required for SIP MWI to work?
A. The line partition must be inside the inbound CSS assigned to the CUC SIP trunk.
B. The line partition must be inside the rerouting CSS assigned to the Cisco Unity Connection SIP trunk.
C. Set the “Enable message waiting for indicator” on the part group.
D. Assign an MWI extension to the mailbox.
Correct Answer: A

 

QUESTION 4
Which message-handling behavior describes how Cisco Unity Connection Single Inbox works for Outlook users who do
not have ViewMail installed?
A. Cisco Unity Connection voice messages are treated as emails without a WAV file attachment.
B. Cisco Unity Connection voice messages are treated as voice messages.
C. Cisco Unity Connection voice messages are treated as emails with a WAV file attachment.
D. Cisco Unity Connection adds a Voice Outbox folder to the Outlook mailbox.
E. Replies to Cisco Unity Connection voice messages are sent to Exchange as well as the Cisco Unity Connection
mailbox for the recipient.
Correct Answer: C
Cisco unity here acts as an IMAP server for the outlook user who don\\’t has view mail installed so user send their
request as an IMAP client and unity will revert back with email and wav file attached to play.

 

QUESTION 5
A Cisco TelePresence SX80 suddenly has issues displaying the main video to a display over HDMI. Which command can
you use the SX80 admin CLI to check the video output status to the monitor?
A. xStatus Video Output
B. xCommand Video Status
C. xConfiguration Video Output
D. xStatus HDMI Output
Correct Answer: A

 

QUESTION 6
What is the validity period of the ITL Recovery certificate in Cisco UCM?
A. 1 year
B. 20 years
C. 5 years
D. 10 years
Correct Answer: B
The validity of ITLRecovery has been extended from 5 years to 20 years to ensure that the ITLRecovery certificate
remains same for a longer period
Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/security/12_0_1/secugd/cucm_b_cucmsecurity-guide-1201/cucm_b_cucm-security-guide-1201_chapter_011.html

 

QUESTION 7
An administrator recently upgraded a Cisco Webex DX80 through its web interface but discovered the next morning that
the unit has received its previous version. What must the administrator do to prevent this from happening again?
A. Assign a phone security profile with secure SIP.
B. Set the prepare cluster for rollback to pre-8-0 enterprise parameter to true.
C. Confirm the phone load name in the phone configuration.
D. Assign a universal device template to the phone.
Correct Answer: C

 

QUESTION 8

Refer to the exhibit. A call is failing to establish between two SIP Devices The called device answers with this SOP.
Which SDP parameter causes this issue?
A. The payload for G.711ulaw must be 18.
B. The calling device did not offer a ptime value.
C. The media stream is set to send only.
D. The RTP port is set to 0.
Correct Answer: D

 

QUESTION 9
Which issue can occur if QoS is not deployed on a Cisco Collaboration architecture across the WAN?
A. 403 Forbidden errors on SIP calls
B. excessive jitter
C. unexpected shut-down on Cisco Unified Communications Manager
D. packet fragmentation
Correct Answer: B

 

QUESTION 10
How is bandwidth allocated to traffic flows in a flow-based WFQ solution?
A. Each type of traffic flow has equal bandwidth.
B. Bandwidth is divided among traffic flows. Voice has priority.
C. Voice has priority and the other types of traffic share the remaining bandwidth
D. All the bandwidth is divided based on the QoS marking of the packets
Correct Answer: A

 

QUESTION 11
Which Cisco Unified Communications Manager service parameter should be enabled to disconnect a multiparty call when
the call initiator hangs up?
A. Drop Ad Hoc Conference
B. H.225 Black Setup Destination
C. Block OffNet To OffNet Transfer
D. Enterprise Feature Access Code for Conference
Correct Answer: A
Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmsys/CUCM_BK_SE5FCFB6
_00_cucm-system-guide-100/CUCM_BK_SE5FCFB6_00_cucm-systemguide100_chapter_011000.html#CUCM_TK_DFC66444_00

 

QUESTION 12
An engineer must manually provision a Cisco IP Phone 8845 using SIP. Which two fields must be configured for a
successful provision? (Choose two.)
A. Media resources group list
B. SIP profile
C. CSS
D. Location
E. Device security profile
Correct Answer: BE

 

QUESTION 13
An engineer with ID012345678 must build an international dial plan in Cisco Unified Communications Manager. Which
action should be taken when building a variable-length route pattern?
A. reduce the T302 timer to less than 4 seconds
B. configure single route pattern for international calls
C. create a second route pattern followed by the # wildcard
D. set up all international route patterns to 0.!
Correct Answer: D

---

Vcecert shares the latest updated Cisco 350-801 exam exercise questions, 350-801 dumps pdf for free.
All exam questions and answers come from the leads4pass exam dumps shared part! leads4pass updates throughout the year and shares a portion of your exam questions for free to help you understand the exam content and enhance your exam experience! Get the full Cisco 350-801 exam dumps questions at https://www.leads4pass.com/350-801.html (pdf&vce)

ps.
Get free Cisco 350-801 dumps PDF online: https://drive.google.com/file/d/1cq9l9Q2Qe4Mk-ivRolvWBH6faPuQ8EN_/