The latest updated Cisco 300-435 exam dumps and free 300-435 exam practice questions and answers! Latest updates from leads4pass Cisco 300-435 Dumps PDF and 300-435 Dumps VCE, leads4pass 300-435 exam questions updated and answers corrected! Get the full Cisco 300-435 dumps from https://www.leads4pass.com/300-435.html (VCE&PDF)

Latest 300-435 PDF for free

Share the Cisco 300-435 Dumps PDF for free From leads4pass 300-435 Dumps part of the distraction collected on Google Drive shared by leads4pass
https://drive.google.com/file/d/1OSPeBK1VwW_nHYSG3w1Oba_apLiTrzLT/

The latest updated Cisco 300-435 Exam Practice Questions and Answers Online Practice Test is free to share from leads4pass (Q1-Q13)

QUESTION 1
Router R1, a branch router, connects to the Internet using DSL. Some traffic flows through a GRE and IPsec tunnel,
over the DSL connection, and into the core of an enterprise network. The branch also allows local hosts to
communicate directly with public sites on the Internet over this same DSL connection. Which of the following answers
defines how the branch NAT config avoids performing NAT for the Enterprise-directed traffic but does perform NAT for
the Internet-directed traffic?
A. By not enabling NAT on the IPsec tunnel interface
B. By not enabling NAT on the GRE tunnel interface
C. By configuring the NAT-referenced ACL to not permit the Enterprise traffic
D. By asking the ISP to perform NAT in the cloud
Correct Answer: C
The NAT configuration acts only on packets permitted by a referenced ACL. As a result, the ACL can permit packets
destined for the Internet, performing NAT on those packets. The ACL also denies packets going to the Enterprise,
meaning that the router does not apply NAT to those packets.

 

QUESTION 2
DRAG DROP
Drag and drop the commands to the Ansible playbook that applies configuration to an interface on a Cisco IOS XE
device. Not all options are used.
Select and Place:

Correct Answer:

Reference: http://imxing.cn/?p=464

 

QUESTION 3
Which action allows for creating a Python script to pull inventory for Cisco SD-WAN Viptela devices using the Viptela
library in the code?
A. from urllib.request import Viptela
B. from viptela.devices import Viptela
C. from viptela.viptela import Viptela
D. from viptela.library import Viptela
Correct Answer: B
The viptela.devices import viptela can be used to put inventory from Cisco SD-WAN viptela devices.

 

QUESTION 4
What is the primary purpose of using the Cisco SD-WAN vManage Certificate Management API?
A. to securely deploy vManage
B. to report an issue to Cisco TAC
C. to install signed certificates
D. to contact Enterprise Certificate Authority
Correct Answer: A
Reference: https://sdwandocs.cisco.com/Product_Documentation/vManage_Help/Release_17.1/Configuration/Certificates

 

QUESTION 5
What is the purpose of using the Cisco SD-WAN vManage Certificate Management API?
A. to generate a CSR
B. to allocate resources to the certificate server
C. to request a certificate from the certificate server
D. to enable vManage Center
Correct Answer: A
Reference: https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/sdwan-xe-gs-book/cisco-sd-wan-overlaynetwork-bringup.html

 

QUESTION 6
FILL BLANK
Fill in the blank to complete the URL for the Cisco SD-WAN API that retrieves a list of users that are logged into a
device.

A. interface?
Correct Answer: A
https://vmanage-ip-address/dataservice/device/interface?deviceId=deviceId Reference: https://sdwan-docs.cisco.com/P
roduct_Documentation/Command_Reference/Command_Reference/vManage_REST_APIs/RealTime_Monitoring_APIs/Interface

 

QUESTION 7
Webhooks that are generated by Cisco DNA Center are REST calls with which properties?
A. JSON payload delivered via PUT
B. XML payload delivered via POST
C. JSON payload delivered via POST
D. XML payload delivered via PUT
Correct Answer: A
Reference: https://developer.cisco.com/docs/dna-center/#!using-id-values-in-rest-requests

 

QUESTION 8
DRAG DROP
Drag and Drop the Frame Relay LMI extensions from the left onto the correct descriptions on the right.
Select and Place:

Correct Answer:

 

QUESTION 9
With the MV Sense API, which REST endpoint provides LUX level?
A. /merakimv/XXXX-XXXX-XXXX/light
B. /merakimv/XXXX-XXXX-XXXX/raw_detections
C. /merakimv/XXXX-XXXX-XXXX/0
D. /merakimv/XXXX-XXXX-XXXX/zones
Correct Answer: A
Reference: https://developer.cisco.com/meraki/mv-sense/#!mqtt/lux-light-levels

 

QUESTION 10
Which two API calls must be issued to attach a device template in Cisco SD-WAN? (Choose two.)
A. “monitor device action status” GET API request with the device ID to display the status of the attached action
B. “monitor device action status” GET API request with the process ID to display the status of the attached action
C. PUT call to initiate the attached action
D. POST call to initiate the attached action
E. GET call to initiate the attached action
Correct Answer: BD
Reference: https://sdwan-docs.cisco.com/Product_Documentation/Command_Reference/Command_Reference/vManage_REST_APIs/Device_Configuration_APIs/Device_Templates

 

QUESTION 11
Which two features are characteristics of software-defined networks when compared to traditional infrastructure?
(Choose two.)
A. configured box-by-box
B. changed manually
C. use overlay networks
D. designed to change
E. requires software development experience to manage
Correct Answer: CD
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Data_Center/VMDC/SDN/SDN.html

 

QUESTION 12
FILL BLANK
Fill in the blank to complete the URL for an API call to Cisco SD-WAN to display the history of the Bidirectional
Forwarding Detection sessions that run on a vEdge router.

A. bfd/synced/sessions?
Correct Answer: A
https://vmanage-ip-address/dataservice/device/bfd/synced/sessions?deviceId=deviceId Reference: https://sdwan-docs.c
isco.com/Product_Documentation/Command_Reference/Command_Reference/vManage_REST_APIs/RealTime_Monitoring_APIs/BFD

 

QUESTION 13
Which statement describes the difference between OpenConfig and native YANG data models?
A. Native models are designed to be independent of the underlying platform and are developed by vendors and
standards bodies, such as the IETF.
B. Native models are developed by individual developers and designed to apply configurations on platforms.
C. OpenConfig models are developed by vendors and designed to integrate features or configurations that are
relevant only to that platform.
D. Native models are developed by vendors and designed to integrate features or configurations that are relevant
only to that platform.
Correct Answer: A
Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/white-paperc11-741518.html

---

Vcecert shares the latest updated Cisco 300-435 exam exercise questions, 300-435 dumps pdf for free.
All exam questions and answers come from the leads4pass exam dumps shared part! leads4pass updates throughout the year and shares a portion of your exam questions for free to help you understand the exam content and enhance your exam experience! Get the full Cisco 300-435 exam dumps questions at https://www.leads4pass.com/300-435.html (pdf&vce)

ps.

Get free Cisco 300-435 dumps PDF online: https://drive.google.com/file/d/1OSPeBK1VwW_nHYSG3w1Oba_apLiTrzLT/