[June 2021] Cisco 300-420 Exam Questions and Answers | Latest Update Real Questions Crack

We share the latest updated Cisco 300-420 test questions and answers for free, all test questions are real cracked, guaranteed to be true and effective! You can practice the test online! Or download the latest 300-420 exam pdf.
The free exam questions are only part of what we share. If you want to get the complete Cisco 300-420 exam questions and answers, you can get them in leads4pass. The leads4pass 300-420 exam dumps contain VCE dumps and PDF dumps.
Cisco 300-420 Exam “Designing Cisco Enterprise Networks (ENSLD)” https://www.leads4pass.com/300-420.html (Total Questions: 141 Q&A)

Article content list:

  1. Get part of 300-420 pdf from google drive for free
  2. Part of Cisco 300-420 exam practice questions from Youtube
  3. Real questions cracking Cisco 300-420 exam questions practice test
  4. Get Cisco exam discount code 2021

Get part of 300-420 pdf from google drive for free

Free share Cisco 300-420 exam PDF from Google Drive provided by leads4pass
https://drive.google.com/file/d/1NBT5egRtZZtNMwl_dh8CYFOBcAKpsXfc/

Part of Cisco 300-420 exam practice questions from Youtube

Cisco 300-420 exam practice questions and answers watch learning in youtube

Cisco 300-420 exam questions online practice test

QUESTION 1
Which two routing protocols allow for unequal cost load balancing? (Choose two.)
A. EIGRP
B. IS-IS
C. BGP
D. OSPF
E. RIPng
Correct Answer: AC

QUESTION 2
An infrastructure team is concerned about the shared memory utilization of a device, and for this reason, they need to
monitor the device state. Which solution limits the impact on the device and provides the required data?
A. IPFIX
B. static telemetry
C. on-change subscription
D. periodic subscription
Correct Answer: A

QUESTION 3

cisco 300-420 certification exam q3

Refer to the exhibit. All routers currently reside in OSPF area 0. The network manager recently used R1 and R2 as
aggregation routers for remote branch locations and R3 and R4 for aggregation routers for remote office locations. The
network has since been suffering from outages, which are causing frequent SPF runs. To enhance stability and
introduce areas to the OSPF network with the minimal number of ABRs possible, which two solutions should the
network manager recommend? (Choose two.)
A. a new OSPF area for R1 and R2 connections, with R1 and R2 as ABRs
B. a new OSPF area for R3 and R4 connections, with R5 and R6 as ABRs
C. a new OSPF area for R3 and R4 connections, with R3 and R4 as ABRs
D. a new OSPF area for R1, R2, R3, and R4 connections, with R1, R2, R3, and R4 as ABRs
E. a new OSPF area for R1 and R2 connections, with R5 and R6 as ABRs
Correct Answer: BE

QUESTION 4
When designing interdomain multicast, which two protocols are deployed to achieve communication between multicast
sources and receivers? (Choose two.)
A. IGMPv2
B. BIDIR-PIM
C. MP-BGP
D. MSDP
E. MLD
Correct Answer: CD

QUESTION 5
What are two valid scaling techniques when an EIGRP network is designed that consists of more than 1000 routers?
(Choose two.)
A. Use structured hierarchical topology with route summarization
B. Used sub-second timers
C. Use the distribute-list command to filter routes
D. Modify delay parameters on the links
E. Implement multiple EIGRP autonomous systems
Correct Answer: AE

QUESTION 6
DRAG-DROP
Drag and drop the characteristics from the left onto the Yang model they describe on the right.
Select and Place:

cisco 300-420 certification exam q6

Correct Answer:

cisco 300-420 certification exam q6-1

QUESTION 7
Which QoS feature responds to network congestion by dropping lower priority packets?
A. CBWFQ
B. tail drop
C. WRED
D. strict priority
Correct Answer: C

QUESTION 8
An organization is designing a detailed QoS plan that limits bandwidth to specific rates. Which two parameters are
supported by the traffic policing feature? (Choose two.)
A. violating
B. marking
C. shaping
D. bursting
E. conforming
Correct Answer: BC

QUESTION 9
What is the advantage of designing an out-of-band network management solution?
A. In the event of a production network outage, network devices can still be managed.
B. There is no separation between the production network and the management network.
C. In the event of a production network outage, it can be used as a backup network path.
D. It is less expensive than an in-band management solution.
Correct Answer: A

QUESTION 10
An architect is designing a network that will utilize the spanning tree protocol to ensure a loop-free topology. The
network will support an engineering environment where it is necessary for end-users to connect their own network
switches for testing purposes. Which feature should the architect include in the design to ensure the spanning-tree
topology is not affected by these rogue switches?
A. BPDU Skew Detection
B. BPDU guard
C. loop guard
D. root guard
Correct Answer: D

QUESTION 11
DRAG-DROP
Drag and drop the model-driven telemetry characteristics from the left onto the mode they belong to on the right.
Select and Place:

cisco 300-420 certification exam q11

Correct Answer:

cisco 300-420 certification exam q11-1

QUESTION 12
An engineer is designing an enterprise campus network. The LAN infrastructure consists of switches from multiple
vendors, and Spanning Tree must be used as a Layer 2 loop prevention mechanism. All configured VLANs must be
grouped in two STP instances. Which standards-based Spanning Tree technology supports this design solution?
A. MSTP
B. RSTP
C. Rapid PVST
D. STP
Correct Answer: A

QUESTION 13
A customer with an IPv4-only network topology wants to enable IPv6 connectivity while preserving the IPv4 topology
services. The customer plans to migrate IPv4 services to the IPv6 topology, then decommission the IPv4 topology.
Which topology supports these requirements?
A. dual-stack
B. 6VPE
C. 6to4
D. NAT64
Correct Answer: A

Get Cisco exam discount code 2021

leads4pass In order to give back to our friends who have supported us for many years, we will share the latest exam discount codes every year

leads4pass cisco discount code

Thank you for reading! I have told you how to successfully pass the Cisco 300-420 exam.
You can choose: https://www.leads4pass.com/300-420.html to directly enter the 300-420 Exam dumps channel! Get the key to successfully pass the exam!
Wish you happiness!

Get free Cisco 300-420 exam PDF online: https://drive.google.com/file/d/1NBT5egRtZZtNMwl_dh8CYFOBcAKpsXfc/

exam

VCECERT is the largest community of Cisco free dumps, here has the latest and most complete Cisco (CCNA, CCNP, Channel Partner Program, Cisco Meraki Solutions Specialist, Express Specialization - SMB Track, Advanced Security Architecture Specialization...) dump Community.

Related Posts

The Ultimate Guide to Passing Cisco 300-410 ENARSI in 2026: Expert Tips, Blueprint Breakdown & Preparation Roadmap

300-410 exam 2026

In 2026, the Cisco 300-410 ENARSI exam stands as the gold standard for enterprise network engineers seeking advanced routing and troubleshooting skills. While many certifications are shifting toward SD-WAN or AI, the 300-410 ENARSI remains focused on the foundation of network operations – routing and troubleshooting.

As more enterprise networks rely on multi-protocol routing and complex VPN architectures, the expertise validated by the ENARSI certification is more crucial than ever. Whether you’re an experienced network engineer or an aspiring professional, 2026 is the ideal year to earn this certification. Here’s why: the exam is stable, its content remains relevant, and its demand in the workforce is expected to continue rising for years to come.

In this comprehensive guide, we will cover everything from the 300-410 ENARSI blueprint to the most efficient study strategies, ensuring you’re equipped with the knowledge to pass with confidence.

What Exactly Is the Cisco 300-410 ENARSI Certification?

The Cisco 300-410 ENARSI exam is an advanced certification designed for network professionals who specialize in enterprise network routing. The exam validates your skills in configuring, troubleshooting, and optimizing complex network infrastructures.

 » Read more about: The Ultimate Guide to Passing Cisco 300-410 ENARSI in 2026: Expert Tips, Blueprint Breakdown & Preparation Roadmap  »

CCNA 200-301 in 2026: Realistic Guide for Career Changers Breaking Into Networking

CCNA 200-301 in 2026

I’m Jenise Barden. I’ve been working as a network engineer for about twelve years now, with a CCNA, CCNP, and a handful of specialist certifications that I’ve picked up along the way. More importantly, I’ve spent a good chunk of my career mentoring people who didn’t start in IT at all—teachers, warehouse supervisors, retail managers, baristas, and plenty of folks who just knew they wanted something more stable and technical.

If you’re looking at the CCNA 200-301 in 2026 and wondering whether it’s still worth your time, whether you’re “too late,” or whether someone with zero IT background can realistically pass and land a job, this post is for you. I’m going to walk you through what the certification really means in 2026, how the exam actually feels, how long it takes to prepare if you’re starting from scratch, and what happens after you pass.

First Things First: Is CCNA Still Worth It in 2026?

Short answer: yes, if you use it the right way.

Longer answer: the CCNA certification 2026 version—exam 200-301 v1.1—is still one of the most recognized entry-level networking credentials in the industry. Cisco has officially confirmed that there are no major changes to the CCNA 200-301 blueprint in February 2026. The recent shifts you may have heard about mainly affect DevNet and cybersecurity tracks, not CCNA. The core topics—routing, switching, IP connectivity, network fundamentals, security basics, and automation concepts—remain stable.

 » Read more about: CCNA 200-301 in 2026: Realistic Guide for Career Changers Breaking Into Networking  »