The latest updated Cisco 300-620 exam dumps and free 300-620 exam practice questions and answers! Latest updates from leads4pass Cisco 300-620 Dumps PDF and 300-620 Dumps VCE, leads4pass 300-620 exam questions updated and answers corrected! Get the full Cisco 300-620 dumps from https://www.leads4pass.com/300-620.html (VCE&PDF)

Latest 300-620 PDF for free

Share the Cisco 300-620 Dumps PDF for free From leads4pass 300-620 Dumps part of the distraction collected on Google Drive shared by leads4pass
https://drive.google.com/file/d/1Zv2qgUd2gbj4MJk_bdaPBIXohQzA5_fJ/

The latest updated Cisco 300-620 Exam Practice Questions and Answers Online Practice Test is free to share from leads4pass (Q1-Q13)

QUESTION 1
An engineer is implementing a connection that represents an external bridged network. Which two configurations are
used? (Choose two.)
A. Layer 2 remote fabric
B. Layer 2 outside
C. Layers 2 internal
D. Static path binding
E. VXLAN outside
Correct Answer: AB

 

QUESTION 2
A RADIUS user resolves its role via the Cisco AV Pair. What object does the Cisco AV Pair resolve to?
A. tenant
B. security domain
C. primary Cisco APIC
D. managed object class
Correct Answer: D
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/Security_config/b_Cisco_APIC_Security_Configuration_Guide/b_Cisco_APIC_Security_Guide_chapter_01011.html

 

QUESTION 3
What must be enabled in the bridge domain to have the endpoint table learn the IP addresses of endpoints?
A. L2 unknown unicast: flood
B. GARP based detection
C. unicast-routing
D. subnet scope
Correct Answer: C
Reference: https://hsvglobalschool.in/dhkycw/cisco-aci-bridge-domain.html

QUESTION 4
Which type of port is used for in-band management within ACI fabric?
A. spine switch port
B. APIC console port
C. leaf access port
D. management port
Correct Answer: C

 

QUESTION 5
Which type of policy configures the suppression of faults that are generated from a port being down?
A. fault lifecycle assignment
B. event lifecycle assignment
C. fault severity assignment
D. event severity assignment
Correct Answer: C
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/all/faults/guide/b_APIC_Faults_Errors/b_IFC_Faults_Errors_chapter_01.html

 

QUESTION 6
Regarding the MTU value of MP-BGP EVPN control plane packets in Cisco ACI, which statement about communication
between spine nodes in different sites is true?
A. By default, spine nodes generate 9000-bytes packets to exchange endpoints routing information. As a result, the
Inter-Site network should be able to carry 9000-bytes packets.
B. By default, spine nodes generate 1500-byte packets to exchange endpoints routing information. As a result, the
Inter-Site network should be able to carry 1800-bytes packets.
C. By default, spine nodes generate 1500-byte packets to exchange endpoints routing information. As a result, the
Inter-Site network should be able to carry 1500-byte packets.
D. By default, spine nodes generate 9000-bytes packets to exchange endpoints routing information. As a result, the
Inter-Site network should be able to carry 9100-bytes packets.
Correct Answer: D

 

QUESTION 7
What must be configured to redistribute externally learned OSPF routes within the ACI fabric?
A. Route Control Profile
B. BGP Route Reflector
C. BGP Inter-leak Route Map
D. PIM Sparse Mode
Correct Answer: B
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/ACI_Best_Practices/b_ACI_Best_Practices/b_ACI_Best_Practices_chapter_010010.html

 

QUESTION 8
Which setting prevents the learning of Endpoint IP addresses whose subnet does not match the bridge domain subnet?
A. “Limit IP learning to network” setting within the bridge domain.
B. “Limit IP Learning to subnet” setting within the EPG.
C. “Limit IP learning to network” setting within the EPG.
D. “Limit IP Learning to subnet” setting within the bridge domain.
Correct Answer: D
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/L2_config/b_Cisco_APIC_Layer_2_Configuration_Guide/b_Cisco_APIC_Layer_2_Configuration_Guide_chapter_010.html

 

QUESTION 9
New ESXi hosts are procured in a data center compute expansion project. An engineer must update the configuration
on the Cisco APIC controllers to support the addition of the new servers to the existing VMM domain. Which action
should be taken to support this change?
A. Create a range of internal VLANs in the associated VLAN pool.
B. Set the encapsulation mode as VXLAN.
C. Enable infrastructure VLAN in the associated AEP.
D. Map the leaf interface selector to the AEP that is associated with the VMM domain.
Correct Answer: D

 

QUESTION 10
An engineer is creating a configuration import policy that must terminate if the imported configuration is incompatible
with the existing system. Which import mode achieves this result?
A. merge
B. atomic
C. best effort
D. replace
Correct Answer: B
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/4-x/aci-fundamentals/Cisco-ACIFundamentals-401/Cisco-ACI-Fundamentals-401_chapter_01011.html

 

QUESTION 11
What are two requirements for the IPN network when implementing a Multi-Pod ACI fabric? (Choose two.)
A. EIGRP routing
B. PIM ASM multicast routing
C. BGP routing
D. VLAN ID 4
E. OSPF routing
Correct Answer: AE

 

QUESTION 12
A data center administrator is upgrading an ACI fabric. There are 3 APIC controllers in the fabric and all the servers are
dual-homed to pairs of leaf switches configured in VPC mode. How should the fabric be upgraded to minimize possible
traffic impact during the upgrade?
A. 1. Create two maintenance groups for the APIC controllers: VPC left and VPC right.
2.
Upgrade the first group of controllers.
3.
Upgrade the second group of controllers.
4.
Upgrade the leaf switches.
B. 1. Create two maintenance groups for APIC controllers: VPC left and VPC right.
2.
Upgrade the leaf switches.
3.
Upgrade the first group of controllers.
4.
Upgrade the second group of controllers.
C. 1. Create two maintenance groups for the leaf switches: VPC left and VPC right.
2.
Upgrade the APIC controllers.
3.
Upgrade the first group of leaf switches.
4.
Upgrade the second group of leaf switches.
D. 1. Create two maintenance groups for the leaf switches: VPC left and VPC right.
2.
Upgrade the first group of switches.
3.
Upgrade the second group of switches.
4.
Upgrade the APIC controllers.
Correct Answer: D

 

QUESTION 13

Refer to the exhibit. Which action should be taken to ensure authentication if the RADIUS servers are unavailable?
A. Adjust the priority of server 10.1.1.1 to 1.
B. Assign the user to the default role.
C. Set the default login realm to LDAP.
D. Set the fallback login to local.
Correct Answer: D

---

Vcecert shares the latest updated Cisco 300-620 exam exercise questions, 300-620 dumps pdf for free.
All exam questions and answers come from the leads4pass exam dumps shared part! leads4pass updates throughout the year and shares a portion of your exam questions for free to help you understand the exam content and enhance your exam experience!
Get the full Cisco 300-620 exam dumps questions at: https://www.leads4pass.com/300-620.html (pdf&vce)

ps.
Get free Cisco 300-620 dumps PDF online: https://drive.google.com/file/d/1Zv2qgUd2gbj4MJk_bdaPBIXohQzA5_fJ/