leads4pass -latest updated Cisco CCDA 300-410 test questions and answers.
All test questions have been corrected and updated to ensure that they are true and valid. You can also practice the actual exam questions in the Cisco 300-410 section online.
If you want to get the complete Cisco 300-410 exam questions and answers, you can get them in leads4pass.
leads4pass 300-410 exam dumps include VCE dumps and PDF dumps. Cisco 300-410 exam
“Implementing Cisco Enterprise Advanced Routing and Services (ENARSI)” https://www.leads4pass.com/300-410.html (total questions: 195 questions and answers)

[Free Part] Cisco 300-410 pdf free from leads4pass

Free share Cisco 300-410 exam PDF from Google Drive provided by leads4pass
https://drive.google.com/file/d/1inqwa_CB0gge-UVzR9JEmcnFQS4Yy1Ck/

[Free Part] Cisco 300-410 online exam practice questions from leads4pass

QUESTION 1

Refer to the exhibit. Network operations cannot read or write any configuration on the device with this configuration from
the operations subnet. Which two configurations fix the issue? (Choose two.)
A. Configure SNMP rw permission in addition to community ciscotest.
B. Modify access list 1 and allow operations subnet in the access list.
C. Modify access list 1 and allow SNMP in the access list.
D. Configure SNMP rw permission in addition to version 1.
E. Configure SNMP rw permission in addition to community ciscotest 1.
Correct Answer: AB

QUESTION 2
Refer to the exhibit. Users report that IP addresses cannot be acquired from the DHCP server. The DHCP server is
configured as shown. About 300 total nonconcurrent users are using this DHCP server, but none of them are active for
more than two hours per day. Which action fixes the issue within the current resources?

A. Modify the subnet mask to the network 192.168.1.0 255.255.254.0 command in the DHCP pool
B. Configure the DHCP lease time to a smaller value
C. Configure the DHCP lease time to a bigger value
D. Add the network 192.168.2.0 255.255.255.0 command to the DHCP pool
Correct Answer: B

QUESTION 3
Refer to the exhibit.

To provide reachability to network 10.1.1.0 /24 from R5, the network administrator redistributes EIGRP into OSPF on R3
but notices that R4 is now taking a ……….. path through R5 to reach 10.1.1.0/24 network. Which action fixes the issue
while keeping the reachability from R5 to 10.1.1.0/24 network?
A. Change the administrative distance of the external EIGRP to 90.
B. Apply the outbound distribution list on R5 toward R4 in OSPF.
C. Change the administrative distance of OSPF to 200 on R5.
Correct Answer: A

QUESTION 4
When provisioning a device in Cisco DNA Center, the engineer sees the error message “Cannot select the device. Not
compatible with template”. What is the reason for the error?
A. The template has an incorrect configuration.
B. The software version of the template is different from the software version of the device.
C. The changes to the template were not committed.
D. The tag that was used to filter the templates does not match the device tag.
Correct Answer: D
If you use tags to filter the templates, you must apply the same tags to the device to which you want to apply the
templates. Otherwise, you get the following error during provisioning: Cannot select the device. Not
Reference: https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/network-automation-andmanagement/dna-center/1-2-10/user_guide/b_cisco_dna_center_ug_1_2_10/b_dnac_ug_1_2_10_chapter_0111.html

QUESTION 5
Refer to the exhibits.

When DMVPN is configured, which configuration allows spoke-to-spoke communication using loopback as tunnel
source?
A. Configure crypto isakmp key cisco address 0.0.0.0 on the hub.
B. Configure crypto isakmp key Cisco address 200.1.0.0 255.255.0.0 on the hub.
C. Configure crypto isakmp key cisco address 200.1.0.0 255.255.0.0 on the spokes.
D. Configure crypto isakmp key cisco address 0.0.0.0 on the spokes.
Correct Answer: A

QUESTION 6

Refer to the exhibit. The administrator configured route advertisement to a remote low resources rooter to use only the
default route to reach any network but failed. Which action resolves this issue? Questions and Answers PDF P-127
A. Change the direction of the distribute-list command from out to in.
B. Remove the line with the sequence number 5 from the prefix list.
C. Remove the prefix keyword from the distribute-list command.
D. Remove the line with the sequence number 10 from the prefix list.
Correct Answer: B

QUESTION 7
Refer to the exhibit. An engineer is trying to connect to a device with SSH but cannot connect. The engineer connects
by using the console and finds the displayed output when troubleshooting. Which command must be used in
configuration mode to enable SSH on the device?

A. no ip ssh disable
B. ip ssh enable
C. ip ssh version 2
D. crypto key generate rsa
Correct Answer: D

QUESTION 8
Which command is used to check IP SLA when an interface is suspected to receive lots of traffic with options?
A. show track
B. show threshold
C. show timer
D. show delay
Correct Answer: A

QUESTION 9

Refer to the exhibit. The R1 and R2 configurations are:

The neighbor relationship is not coming up.
Which two sets of configurations bring the neighbors up? (Choose two.)

A. Option A
B. Option B
C. Option C
D. Option D
E. Option E
Correct Answer: DE

QUESTION 10
Refer to the exhibit.

A network engineer for AS64512 must remove the inbound and outbound traffic from link A during maintenance without
closing the BGP session so that there ………… a backup link over link A toward the ASN. Which BGP configuration on
R1 accomplishes this goal?
A. router-map link-a-in permit 10 set weight 200 route-map link-a-out permit 10 set as-path prepend 64512 route-map
link-b-in permit 10
set weight 100
route-map link-b-out permit 10
B. router-map link-a-in permit 10 set weight 200 route-map link-a-out permit 10 route-map link-b-in permit 10 set weight
100
route-map link-b-out permit 10 set as-path prepend 64512
C. router-map link-a-in permit 10 set local-preference 200 route-map link-a-out permit 10 route-map link-b-in permit 10
route-map link-b-out permit 10
set as-path prepend 64512
D. router-map link-a-in permit 10 route-map link-a-out permit 10
set as-path prepend 64512 route-map link-b-in permit 10 …… ……
Correct Answer: D

QUESTION 11
Which technology uses the many-to-one method of mapping IP addresses?
A. static NAT
B. dynamic NAT
C. NAT-PT
D. PAT
Correct Answer: D

QUESTION 12
Which Ipv6 first-hop security feature helps to minimize denial of service attacks?
A. IPv6 Router Advertisement Guard
B. IPv6 Destination Guard
C. DHCPv6 Guard
D. IPv6 MAC address filtering
Correct Answer: B

QUESTION 13

Refer to the exhibit. Which action restores the routes from neighbors while still filtering 1.1.1.0/24?
A. Add a second line in the access list to permit any.
B. Modify the route map to permit the access list instead of deny it
C. Modify the access list to deny insteac of permit it.
D. Add a second sequence in the route map permit 20
Correct Answer: B

Maybe you also want to access more past Cisco 300-410 exam questions and answers: [MAR 2021] Cisco 300-410 exam dumps and online practice questions are available from lead4pass

---

Cisco CCDA 300-410 exam questions and answers have been updated and corrected! Guaranteed to be true and effective! leads4pass has the most complete exam policy!
If the exam is unsuccessful, a full refund will be issued! To pass the Cisco 300-410 exam, please click: https://www.leads4pass.com/300-410.html (PDF + VCE) to get the key to successfully passing the exam!
wish you success!

[Free Part]Get free Cisco 300-410 exam PDF online: https://drive.google.com/file/d/1inqwa_CB0gge-UVzR9JEmcnFQS4Yy1Ck/