New CCNP Enterprise 300-425 dumps exam material sharing

cisco 300-425 exam

Download New CCNP Enterprise 300-425 dumps: https://www.leads4pass.com/300-425.html, use this exam material to help you 100% successfully pass the 300-425 ENWLSD certification exam! Pave the way for your dream job:

Wireless Network Engineer: As a wireless network engineer, you would be responsible for designing, implementing, and maintaining wireless networks for organizations.

Network Administrator: Network administrators oversee the day-to-day operations of an organization’s network infrastructure.

Network Consultant: Network consultants provide expert advice and guidance to organizations regarding their network infrastructure.

Network Architect: Network architects design and create high-level network structures and solutions for organizations.

Wireless Solutions Specialist: As a wireless solutions specialist, you would focus on implementing and optimizing wireless solutions for clients.

New CCNP Enterprise 300-425 dumps exam material contains 120 latest exam questions and answers! Reviewed by the professional team of CCNP Enterprise, corrected, and verified by actual scenarios, in compliance with 300-425 ENWLSD
Designing Cisco Enterprise Wireless Networks” Exam Topic Criteria.

Practice some New CCNP Enterprise 300-425 dumps exam material online

FromNumber of exam questionsAssociated certificationsLast updated
Lead4Pass15CCNP Enterprise300-425 dumps
Question 1:

An engineer is reducing the subnet size of the corporate WLAN by segmenting the VLAN into smaller subnets. Clients will be assigned a subnet by location.

Which type of groups can the engineer use to map the smaller subnets to the corporate WLAN?

A. WLC port groups

B. RF groups

C. AP groups

D. interface groups

Correct Answer: C

Reference:

New CCNP Enterprise 300-425 dumps exam material 1

Question 2:

Refer to the exhibit.

New CCNP Enterprise 300-425 dumps exam material 2

A client roams between two APs that are registered to two different controllers, where each controller has an interface in the client subnet. Both controllers are running AireOS.

Which scenario explains the client roaming behavior?

A. Controllers exchange mobility control messages (over UDP port 16666) and the client database entry is moved from the original controller to the new controller.

B. Controllers do not exchange mobility control messages (over UDP port 16666) and the client database, entry is not moved from the original controller to the new controller.

C. Controllers exchange mobility control messages (over UDP port 16666) and a new client session is started with the new controller.

D. Controllers exchange mobility control messages (over UDP port 16666) and the client database entry is tunneled from the original controller to the new controller.

Correct Answer: A

Reference:

New CCNP Enterprise 300-425 dumps exam material 2-1

Question 3:

Which non-Wi-Fi interferer can be identified by Metageek Chanalyzer?

A. PDAs

B. jammers

C. smartphones

D. printers

Correct Answer: B

Reference: https://www.metageek.com/training/resources/wifi-and-non-wifi-interference

New CCNP Enterprise 300-425 dumps exam material 3

Question 4:

An engineer is performing a predictive wireless design for a medical treatment environment, which requires data and voice services.

What is the minimum requirement for the design?

A. overlapping-72 dBm coverage from two access points

B. continuous-67 dBm coverage from one access point

C. continuous-72 dBm coverage from one access point

D. overlapping-67 dBm coverage from two access points

Correct Answer: B

Reference:

New CCNP Enterprise 300-425 dumps exam material 4

So-67dBm covers both Data and Voice with a single AP

Question 5:

A wireless engineer is hired to design a network for a technology company. The company campus has four buildings and a warehouse with access points that provide full wireless coverage as well as a pair of WLCs located in the core of the network.

Which type of wireless architecture is being used?

A. unified deployment

B. autonomous deployment

C. centralized deployment

D. distributed deployment

Correct Answer: C

Reference:

New CCNP Enterprise 300-425 dumps exam material 5

Question 6:

A customer is looking for a network design with Cisco Hyperloctation using AP4800 for location tracking via a custom mobile app Issues appeared in the past with refresh rates for location updates.

What needs to be implemented to meet these requirements?

A. Cisco CMX SDK in the location app

B. redundant CMX and fetch location in round-robin fashion.

C. device Bluetooth via the app

D. Cisco FastLocate technology

Correct Answer: D

Question 7:

A network engineer is working on a design for a wireless network that must support data, voice, and location services. To support these services, which access point placement must the engineer use?

A. corner only

B. perimeter and corner

C. perimeter only

D. indoor and outdoor

Correct Answer: B

Reference:

New CCNP Enterprise 300-425 dumps exam material 7

Question 8:

A customer has multiple WLCs running N+1 redundancy with APs equally distributed. Only one WLC is a designated backup for all other WLCs so the customer must ensure that the most critical APs remain registered or get priority over other APs in case of a WLC failure.

However, the customer notices on WLC failure that some critical APs remain unregistered What needs to be addressed in the design?

A. AP fallback is not enabled on the backup WLC.

B. AP failover priority is not enabled globally on the backup WLC.

C. AP failover priority is not enabled globally on the failed WLC.

D. AP fallback is not enabled on the failed WLC.

Correct Answer: B

Question 9:

Two Cisco 5520 wireless LAN controllers are managing all access points throughout the network. The WLCs are in different locations to provide geographical redundancy a mobility group has been configured on both WLCs and has a UP status on both controllers.

The Aps in location A are statically configured to use controller A as the primary and controller B as the secondary. If the WLC in location A goes offline.

The Aps successfully join the WLC in location, but they do not fail over to their primary configured controller.

Which configuration task fixes the issue?

A. Configure the WLC in location A as primary using the CAPWAP AP Controller IP Address command on all the location A Access points.

B. Use DHCP Option 43 and specify WLC in location A as primary.

C. Enable AP fallback globally on the WLC

D. Change the AP Failover Priority to critical.

Correct Answer: C

Question 10:

Refer to the exhibit.

New CCNP Enterprise 300-425 dumps exam material 10

An enterprise has offices spread around the globe. The APs are connected to different controllers installed in separate data centers.

The IT team wants to allow clients to roam from controllers in group ABC to controllers in group XYZ.

Which feature must be incorporated in the design to accomplish this task?

A. switch peer group

B. workgroup bridge

C. mDNS gateway

D. mobility lists

Correct Answer: D

Question 11:

An engineer must configure the virtual IP address on multiple controllers in a mobility group.

Which rule must the engineer follows to ensure proper roaming?

A. Ensure that the DNS entry is tied to the virtual IP address of the WLC.

B. Use a unique IP address for each WLC.

C. Ensure that the DNS Host Name field is defined.

D. Use the same IP address for each WLC.

Correct Answer: D

Reference:

New CCNP Enterprise 300-425 dumps exam material 11

Question 12:

A customer is concerned about mesh backhaul link security. Which level of encryption does the backhaul link use?

A. hash

B. AES

C. WEP

D. 3DES

Correct Answer: B

Reference:

New CCNP Enterprise 300-425 dumps exam material 12

Question 13:

A network engineer needs to create a wireless design wired IP surveillance cameras in the parking lot through a mesh AP. To which operating mode of the AP should the cameras connect?

A. Flexconnect

B. MAP

C. RAP

D. Local

Correct Answer: B

Question 14:

A network engineer is troubleshooting connectivity issues between two WLCs running 8. x code in SSO mode and finds that the redundancy management heartbeat is failing.

Which packet type must be filtered for heartbeats when taking a capture to verify communication?

A. RSTP

B. UDP

C. TCP

D. ICMP

Correct Answer: B

Question 15:

What is the recommended cell overlap when designing a wireless network for Cisco Hyperlocation?

A. 20%

B. 30%

C. 40%

D. 50%

Correct Answer: A

Reference:

New CCNP Enterprise 300-425 dumps exam material 15


All candidates participating in the Cisco 300-425 ENWLSD certification exam are just to get the job they want, realize their own value, and get more rewards! Use New CCNP Enterprise 300-425 dumps: https://www.leads4pass.com/300-425.html
Helps you practice with ease and guarantees you 100% success on the 300-425 ENWLSD certification exam!

Tips: New CCNP Enterprise 300-425 dumps exam materials are suitable for all candidates (novice and experienced) and updated throughout the year, any time use is guaranteed to be true and effective!